Can anyone describe replacing this mirror. I assume it is removed in similar fashion to a 240D by taking off the inside plate. Where is the electrical connection? Does the door panel have to be removed? Thanks for any guidance.

John

__________________
Certified Registered Nurse Anesthetist (CRNA)
2002 F250 powerstroke with Plantdrive WVO conversion
1983 300SD 190K miles ,sold
2006 E320 CDI

The inside plastic triangle pops off (flexible). Then you'll encounter a triangle shaped piece of foam that covers the wire connector. The philip screws to remove the mirror will also be visible with the foam removed.

Not too bad.... again, this is all from memory.

__________________
~shell
As of 2/2010:
2001 CLK55 0o\=*=/o0
13.6 @ 106mph
10K mi
1984 300SD
260K mi and going and going...
97 S600
46K miles
1991 Sentra SE-R (extremely dorked with)
www.se-r.net

Your memory serves you well. I just checked my FSM CD-ROM and that is exactly how it is described and pictured. Thanks.

John

__________________
Certified Registered Nurse Anesthetist (CRNA)
2002 F250 powerstroke with Plantdrive WVO conversion
1983 300SD 190K miles ,sold
2006 E320 CDI