|
|
|
#1
|
|||
|
|||
84' 190D Gauges suddenly quit - help
The fuel gauge, water temp gauge and tach suddenly stopped
working while I was driving. I bought two manuals on ebay that didn't help - neither had the correct wiring diagram. Does anyone know where to start? Where is the instument panel grounded? Where is the tachometer sensor? Thanks. Curt |
#2
|
|||
|
|||
Does your fan blower still work. I know there are some gauges on that circuit, check the fuse.
__________________
1982 300TD 279K. 1984 190D 5sp 265K |
#3
|
|||
|
|||
Yes, the blower works.
|
#4
|
||||
|
||||
the fuel/oilpreasure gauge works off the same fuse....#10 i think, it has a bridge linked to another fuse spot.
the tach is pluged in a wire that runs down thru firewall to bell housing were pickup is located. if fuse looks good try another,get some die-electric grease in there. also there isn't much room behind gauge cluster,may be wires vibrated off......... fwiw mark
__________________
84 190D 2.2 auto on the road 85 190D 2.2 auto blown head/cas |
Bookmarks |
|
|