reinstalling w126 cluster SRS/ABS/SEATBELT warning light locations?
I'm putting my cluster back in with all new bulbs.
there are 3 warning lamps on the right hand side- SRS, SEATBELTS and AIRBAG which are not part of the cluster's integral PCBoard. The bulbs have their own separate harness and just sit inside their housings. I have no idea the orientation they should go. They all light up when the key is on, 2 go off but one last stays on when the engine is running and I would like to know which one it is before I pull the bulb and forget about it. The wire colors are black with reddish stripe and pinkish/orangish (I'm colorblind so that's as close as I can get) for what it's worth, the ABS system worked on the ice yesterday so if I were to guess by elimination, it's probably the air bag light or seat belt light staying on all the time. Is there another way to check? |
According to the diagrams on my MB disks...
Seatbelt light only has 1 wire - Green/black Anti lock brakes have 2 wires - Black/Red and Brown/Yellow SRS has 2 wires - Black/Red and Pink Even if you're color blind it shouldn't be too hard to fix. The seatbelt light only has 1 wire and will be easy to indentify. Antilock will have 2 striped wires, SRS will have 1 striped and 1 solid color wire. Hope this helps. |
That definitely clarifies things. Thank you- It's the Airbag light.
Strange, it wasn't on before it all started coming apart and I didn't disrupt any of the airbag harness. The driver's seat belt harness was damaged recently when I replaced the seat spring and is disconnected. Can that be causing the code? Any advise on how to reset or test diagnose this early SRS system? |
All times are GMT -4. The time now is 02:26 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website