Not getting fuel after replaced fuel lines
Okay, so I replaced the fuel lines and I can't get the car started again. I have her on a battery charger, and I cracked all the injector lines and a small amount of fuel has come out, but she still doesn't want to turn over.
I know on the 80-85's you have the primer, but how do I prime the fuel lift pump on a 87 300sdl. Any help would be great. Thanks |
Using starter motor crank 30 sec's at a time on the D2 tank. If a single veggie tank run a temp fuel bottle to get it going first. Once running look for the air leak; especially on the veggie side of the plumbing.
|
Holding it on for 30 seconds sounds like a long time. Are you sure 30 isn't damaging anything?
|
You have to crank the starter to reprime (get the air out) the fuel system. Crank 30 secs, wait 10 secs, crank 30 more; do that 3 times then let starter cool for an hour while you charge it and then give it another go.
|
All times are GMT -4. The time now is 02:06 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website