what is the step before turning the injector out? and how do u do this

__________________
1985 300D - 599,xxxk - blue interior #265 Monark Nozzle, AL129X, 15" Ronals, Gen II Big Brakes hunting
1985 300D - 491,xxxk - in prog-{A-A IC, 3" exhaust, psi\pyro, 28*BTDC, Hella Euros, IP Limiter removal
1985 300TD - 783,xxxk - parts car,used new engine with ALDA cap inplace
1987 Kenworth T-600 8LL 425 CAT Mech. - 6,000,000+k - DEI exhaust wrap, punched through resonators, 1 recent rebuild,

Clarify, there is no "injector lock washer". Turning the injector out == removing the injector?

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

ok ill turn harder then, ty
kinda looked like a washer around it

__________________
1985 300D - 599,xxxk - blue interior #265 Monark Nozzle, AL129X, 15" Ronals, Gen II Big Brakes hunting
1985 300D - 491,xxxk - in prog-{A-A IC, 3" exhaust, psi\pyro, 28*BTDC, Hella Euros, IP Limiter removal
1985 300TD - 783,xxxk - parts car,used new engine with ALDA cap inplace
1987 Kenworth T-600 8LL 425 CAT Mech. - 6,000,000+k - DEI exhaust wrap, punched through resonators, 1 recent rebuild,

Yeah, just remove the hard fuel line(s) with a 27mm or 1 1/16 deep socket, remove as you would anything else.
Below that, there is a heat shield.

__________________
83 SD

84 CD

The washer you are referring to is the prechamber collar. You will need a good bit of grunt to get the injector out.

__________________
http://superturbodiesel.com/images/sig.04.10.jpg
1995 E420 Schwarz
1995 E300 Weiss
#1987 300D Sturmmachine
#1991 300D Nearly Perfect
#1994 E320 Cabriolet
#1995 E320 Touring
#1985 300D Sedan
OBK #42

Injector, injector Heat shield and injector Nozzel LINK THREAD
Injector + Heat shield + Nozzle, Prechamber + Collar, and Nailing. LINK THREAD









Have a great day.

__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic

https://www.boldegoist.com/

Yes, what the heat shield rests in. A home made tool, or a $$$ one to remove those, be sure to take out the glow plugs first.

__________________
83 SD

84 CD

Turn the injector by the hex that takes a 27mm socket. Make sure the socket you use doesn't deform or break off the return line nipples. Don't loosen the collar with wrench flats!

Sixto
87 300D

for new members