PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Rebuilt 4-speed tranny on eBay (http://www.peachparts.com/shopforum/diesel-discussion/211840-rebuilt-4-speed-tranny-ebay.html)

ForcedInduction 01-25-2008 11:22 PM

Rebuilt 4-speed tranny on eBay
 
Not mine, just passing along a good deal.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=280194704668

bgkast 01-26-2008 02:26 PM

Quote:

I pulled it out after only a few months to swap in an automatic trans. This is a direct fit for 1980 and prior 240D or 1971 and earlier 220 cars. It will fit a 1981-1983 240D with minor modifications to the shifter rods. I had this in a 1982 300D turbo using the stock 240D flywheel and clutch. Man, was that fun to drive!
Sounds fishy...who would swap back to an auto box? :D

pawoSD 01-26-2008 02:29 PM

Quote:

Originally Posted by bgkast (Post 1744108)
Sounds fishy...who would swap back to an auto box? :D

Someone who drives mostly in city traffic or in a place with a lot of hills and doesn't want to be shifting constantly? :D ;)

My girlfriend's current situation, in a nutshell. She doesn't mind stick except for the above issues. (Which I would also get annoyed by) I'd have to shift 50 times just to travel 5 miles to school every day. No thanks.

bgkast 01-26-2008 03:30 PM

It builds up your left calf muscle!

ForcedInduction 01-26-2008 03:43 PM

Seller said the engine blew, he left the auto on the replacment engine and later found a 5-speed to use instead of this 4.

sixto 01-26-2008 04:24 PM

Nothing in the receipt suggests the tranny was rebuilt. Release bearing and slave technically aren't in the tranny. Basically it was resealed unless he has more receipts.

Sixto
87 300D

rick surgent 01-26-2008 04:43 PM

So if I replace an unspecific seal, a throw out bearing and a slave clylinder I have rebuilt a manual transmission. Brilliant :D

Guys if anyone wants the 4 speed setup I have 400.00 takes it all. It came out of another members 240 that threw a rod. I was told it drove well and have no reason to doubt Ken's word. If shippping is a problem I will be driving from NJ to Houston in a few weeks, I could drop it off if you're not to far out of the way.


All times are GMT -4. The time now is 01:28 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website