Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-27-2008, 07:00 AM
Registered User
 
Join Date: Dec 2007
Posts: 12
need alt mount bracket for 79 240d

I need an Altenator mount bracket (main aluminum to engine) I just purchased this for an SVO conversion and someone cobbled together the alt and ruined the mount bracket. If any one is parting out one I would be interested. Thanks

Reply With Quote
  #2  
Old 01-27-2008, 03:00 PM
Registered User
 
Join Date: May 2007
Location: Out in the Boonies of Hot, Dry, Dusty, Windy Nevada
Posts: 9,585
Have you checked out your local wrecking yards? we had 2 240D at our
local P N P last week. don`t know if they are still there.

some one here on the forum should have a parts vehicle. or check the
parts section.

Charlie
__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works
Reply With Quote
  #3  
Old 01-28-2008, 07:15 PM
minimike
 
Join Date: Oct 2007
Location: LI, NY
Posts: 320
I've got an 85 240D import and the bracket is steel. I know, I've welded it.
Reply With Quote
  #4  
Old 01-28-2008, 07:39 PM
Registered User
 
Join Date: Mar 2002
Location: Rochester, NY
Posts: 333
All I can find in the junkyards lately have been old 240's and Volvos. Trying to find an '87 300D, or any other 124 body, in the yards is almost impossible. Wish I still had the 240 as I would have been able to find parts for it.
__________________
Mike

'80 300D
'84 300D
'85 300D
'87 300D
Reply With Quote
  #5  
Old 01-29-2008, 06:58 AM
toomany MBZ's Avatar
Registered User
 
Join Date: Nov 2006
Location: central Va
Posts: 7,820
MB used a few different brackets, pic of yours? (I mean that in a NICE way!)
__________________
83 SD

84 CD
Reply With Quote
  #6  
Old 01-29-2008, 05:17 PM
Registered User
 
Join Date: Dec 2007
Posts: 12
pic of bracket

here is a pic of the bracket that I need, it has a mount(not shown) that attaches comes from the other side to the front of the block(all part of same bracket)

Thanks
Attached Thumbnails
need alt mount bracket for 79 240d-dscf0901.jpg  
Reply With Quote
  #7  
Old 01-29-2008, 06:51 PM
toomany MBZ's Avatar
Registered User
 
Join Date: Nov 2006
Location: central Va
Posts: 7,820
OK, that's the bracket that bolts to the block, a pick-n-pull is your best bet. The pic is of the mount, not shown, right?
Attached Thumbnails
need alt mount bracket for 79 240d-parts-101.jpg  
__________________
83 SD

84 CD
Reply With Quote
  #8  
Old 01-29-2008, 06:54 PM
Registered User
 
Join Date: Jan 2002
Posts: 18,355
I think you have to remove the main pulley on the crank to access that mount.
__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13
Reply With Quote
  #9  
Old 01-29-2008, 09:20 PM
Registered User
 
Join Date: Dec 2007
Posts: 12
mount

That is the mount for the adjustment. I have that one I just finished welding it back together, that is how I realized the lower mount was bad, someone stuck a 3/8 carriage bolt in there and ruined the holes.

I guess I should have written mount hole. There is a mount bolt hole on the front of the mount pictured.

And no I did not have to remove the harmonic balancer(pully on the crank)

Thanks alot,

Tim

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 03:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page