|
|
|
#1
|
|||
|
|||
Stupid Alternator Question number 1001
I'm having to tighten the alt. belt on my '80 240D about every 2 weeks and can't think of a rational explanation for the slippage. If I put any more mustard on that pivot bolt I'm gonna stretch it to breaking point. Anybody got a good explanation for this phenomenon?
Last edited by farquand; 01-30-2008 at 08:39 PM. Reason: forgot to tell em what model |
#2
|
||||
|
||||
maybe you have a bad belt and it keep stretching
__________________
1981 300SD 512k OM603 |
#3
|
|||
|
|||
What kind of locking mechanism do you have? One kind is the threaded bolt on top attached to the nut of the top adjusting bolt. The other is the geared mechanism on the bottom adjusting bolt.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#4
|
|||
|
|||
I have the threaded bolt on top kind
|
#5
|
|||
|
|||
I'd try a new belt.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#6
|
||||
|
||||
Make sure you've it tightened down, otherwise, as others have mentioned, new belt, doesn't make sense tho.
__________________
83 SD 84 CD |
#7
|
||||
|
||||
This happened to me... if the belt is too narrow it will start to rinde down the pulley groove and loosen up. As it does this it burns the edges and get narrower each time you tighten it. Make sure you get a replacement that is 15mm wide. I had bought the narrow belts at the dealer and they had the same part number as the ones that I replaced so you have to really get out a ruler and measure the belt width. My local NAPA had belts that fit correctly and I have not had the problem come back
__________________
"I have no convictions ... I blow with the wind, and the prevailing wind happens to be from Vichy" Current Monika '74 450 SL BrownHilda '79 280SL FoxyCleopatra '99 Chevy Suburban Scarlett 2014 Jeep Cherokee Krystal 2004 Volvo S60 Gone '74 Jeep CJ5 '97 Jeep ZJ Laredo Rudolf ‘86 300SDL Bruno '81 300SD Fritzi '84 BMW '92 Subaru '96 Impala SS '71 Buick GS conv '67 GTO conv '63 Corvair conv '57 Nomad |
#8
|
||||
|
||||
ditto.
also be SURE you are tightening the three back bolts on the alt. the tensioner bolt is just for setting tension, it CANT hold the belt tight.
__________________
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread "as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do! My drivers: 1987 190D 2.5Turbo 1987 190D 2.5Turbo 1987 190D 2.5-5SPEED!!! 1987 300TD 1987 300TD 1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere! |
#9
|
||||
|
||||
Quote:
This sounds correct. The belts for the two belt system on the turbodiesels is narrower but the diff is very hard to see. Tom W
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
Bookmarks |
|
|