|
|
|
#1
|
|||
|
|||
300D engine will not stop
The engine in my 1985 300D won't stop after I turn off the car and remove the key. I've had to raise the hood each time and push the kill switch. I've only had the car for a few weeks, so I don't know it very well.
My Haynes manual gives me no help as to how to solve this problem. Is it something in the vaccuum system? Thanks a lot! JB "not stopping is better than not starting." |
#2
|
||||
|
||||
Yeah it's the vacuum system. Big leak somewhere.
__________________
'79 300SD '82 Chevy Chevette diesel |
#3
|
|||
|
|||
Yes, it's something in the vacuum system.
Prime candidates include power door locks and climate control servos (you probably have automatic climate control.) Cap off first, one, the other, than both and see if the problem changes at all. For me, it was power locks -- capping off that part of the vacuum system fixed it totally.
__________________
1983 Mercedes-Benz 240D Automatic, A/C, Power Sunroof, Power Right Side Mirror 231K Miles FOR SALE MAKE OFFER |
#4
|
||||
|
||||
Yes probably vacuum related.
- Leak in system that is not allowing enough vacuum to engage shut off valve -Shut off valve is broken -Vacuum valve on ignition switch is broken/leaking Do you have a Miti-Vac or similar device?
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#5
|
||||
|
||||
You're not the first to have this problem and you won't be the last!
There is a brown vacuum line that runs from the drives front wheel well to the shut off valve on the back of the injector pump. Follow that line and make sure the hoses are pushed up in the rubber fittings. 90% of the time that is the issue. It happened to me when I was changing the clear primary filter down by the lift pump. It is easy to do. BTW, use the search feature, this problem is VERY well documented here on the forum. There are even some nice photos out there. -Jim
__________________
1995 S350D, Green with black leather interior. Bought January 2008 w/ 233,xxx miles. I did 22,000 miles during the first year of ownership. |
#6
|
||||
|
||||
There are great vacuum diagrams at the top of the General Information section. They will probably be helpful to you.
__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century OBK #55 1998 Lincoln Continental - Sold Max 1984 300TD 285,000 miles - Sold The Dee8gonator 1987 560SEC 196,000 miles - Sold Orgasmatron - 2006 CLS500 90,000 miles 2002 C320 Wagon 122,000 miles 2016 AMG GTS 12,000 miles |
#7
|
|||
|
|||
You'll need to trace down the vacuum problem but it is usually not the shut off valve itself that is the problem. In the meantime, buy a 4' length of rubber vacuum hose of suitable diameter. Follow the brown vacuum line described above. Remove the brown vacuum line from the shut off valve and replace with the vacuum hose. With the engine running, suck on the hose. If the engine shuts off, you have confirmed your shut off valve is ok. Run the hose out of the engine compartment at the cowling, leaving about a foot exposed. Now shut the hood. Until you trace down the vacuum leak, you can how shut off your engine without opening the hood by simply sucking on the hose.
Tolerate this solution either until you have learned enough about the vacuum system to isolate the problem or you get too embarassed to do it anymore.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#8
|
||||
|
||||
OK. Right by the brake booster you will see vac lines going through the firewall.
Yellow is door locks. Yellow/gray is vac. cannister in trunk Green is climate control stuff Brown is shutoff to key switch Black is a vent line to under dash area Golf tees or similar is useful here. Unplug green line and put tee in rubber connector to block it. Start car, let run for 30 seconds and try and turn off. Next, if it still runs, unplug yellow line, plug up connector and do the same. These are the two most common. The above assumes you do not yet have a Mityvac, which you should be purchasing shortly {around $30-35 bucks} Also, this assumes you followed the large vac tube from vac pump at front of engine to make sure there was not broken tab off of it, or any unplugged vac line. Since you didn't mention you had very hard brakes we'll assume the vac pump is working. And it isn't usually the shutoff valve.
__________________
Jimmy L. '05 Acura TL 6MT 2001 ML430 My Spare Gone: '95 E300 188K "Batmobile" Texas Unfriendly Black '85 300TD 235K "The Wagon" Texas Friendly White '80 240D 154K "China" Scar engine installed '81 300TD 240K "Smash" '80 240D 230K "The Squash" '81 240D 293K"Scar" Rear ended harder than Elton John |
#9
|
||||
|
||||
here is a link to the thread that I just went through with all these guys...and they helped me alot...you might want to just read through the questions that came up for me and some of the extremely helpful tips from the many responses I had...
http://www.peachparts.com/shopforum/showthread.php?t=210377
__________________
1991 300CE Sportline 1983 300SD TurboDiesel (Gone but not forgotten) |
Bookmarks |
|
|