|
|
|
|
|
#1
03-10-2009, 05:27 PM
|
||||
|
||||
|
81 300SD Blower issue
I have been attempting to get this car ready to drive. I am down to no blower operation.
I have a known good CCU, blower, and black box. I do not have 12V to the fuse for the fan, #11 I believe. IF I jump 12V onto this, it all works as it should. How do I get the power back for the fuse for the blower? What can impact it? if it is a wire, where to and from? Thanks
__________________
83 300SD Dark Silver Dark brown inside 
|
|
#2
03-10-2009, 06:19 PM
|
||||
|
||||
|
found a post that talked about a bad key switch. I went and started the car and turned the key a little, and it worked.
Would a bad switch also cause the car to charge and not charge at random, and also drain the battery? Will it be easier to change the switch, or change the whole steering column from the parts car? Thanks Doug
__________________
83 300SD Dark Silver Dark brown inside
|
|
#3
03-10-2009, 11:53 PM
|
||||
|
||||
|
so, how hard is it to change? price looks reasonable.
__________________
83 300SD Dark Silver Dark brown inside
|
|
#4
03-11-2009, 03:08 AM
|
||||
|
||||
|
Lots to read
I used this forum to do this switch change and alot more. Here is what you have to do.
First, arrow to the top of this page and click on Shop Forum. This will take you to the home page. On this page arrow down to the DIY links by parts catagory. Click on FAST NAVIGATION to DO IT YOURSELF LINKS Click on BODY MECHANICAL & TRIM Click on IGNITION CYLINDER TUMBLER REPLACEMENT Click on IGNITION CYLINDER, SWITCH, or HOUSING? Arrow down and read posts by WAYLIFESHOULDBE member. Hope this helps.
__________________
 Selling used Mercedes parts on Ebay...always changing... cdplayer51 take a look! ____________
|
 |
| Bookmarks |
|
|
Linear Mode
