|
|
|
#1
|
||||
|
||||
radiator light w124
I havde a new radiator installed but i have the radiator light on on the cluster,is there a reset? where is it? also where is the brake light reset,new brakes but still have that light on also.
thanks crew. 87tdt w124
__________________
W123 1985 300TD naturally aspirated |
#2
|
|||
|
|||
the light means the coolant level is low.
i believe the brake warning light is also telling you the brake fluid level is low.
__________________
________________ punkinfair |
#3
|
|||
|
|||
Your fluid is too low in the expansion tank. You used the correct fluid with the new radiator, right? Not sure on the brake light.
__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous “Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss |
#4
|
||||
|
||||
The brake wear light means that the wear sensors are contacting one of the rotors (or shorted to ground), there is no reset, it should go off when new pads are installed correctly. it is possible that the tech installed something wrong.
If it is the brake warning light, it is fluid level. If it is the ABS light, the brake ABS system needs service. If it is the Parking Brake light, the parking brake is not all of the way up. Hope this helps.
__________________
Gone to the dark side - Jeff |
Bookmarks |
|
|