anyone have any good pics of this?
I have an 87 300 TDT and I would like to remove/disconnect the EGR. Anyone have a link with pics on how to do this? I don't care if it stays on the car if that is acceptable I just want to try it unhooked. Not sure where to find it in all the mess of hoses in there.
|
Put a BB in the vacuum line to disable it.
|
sorry my car is at the body shop so i can't take a photo but the egr is pretty easy to find, to the far left of the engine bay, just above the turbo, the top of the egr valve looks like a silver flying saucer. there is a vacuum line out the top of it, if you put a small BB or ball bearing inside this line the valve is disabled.
i think if you search here you'll come up with photos if that description doesn't make it clear enough. |
so it dosnt have to be removed?
|
Only for appearance or if its leaking.
|
also- if you dont have any BB guns- I just pulled the hard plastic line from the rubber connector and melted it closed w/ a Bic lighter. reinstall- looks like nothing happened, easy to reverse by trimming the line 1/4"
|
All times are GMT -4. The time now is 10:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website