Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-26-2008, 09:57 AM
Registered User
 
Join Date: Oct 2007
Location: Islamorada, FL
Posts: 59
Idler arm kit installation

Ok, so I did the idler arm kit, center drag link, steering damper, R/L tie rod assemblies. Fairly simple job, My question is, I took the idler arm off and removed drag link and tie rod from it, put idler arm back on by itself before attaching drag link and tie rod to it, how do I know I got it in correct position? Reattached drag link and tie rod and car seemed to drive okay, alignment is next thing. If I remember correctly I tightened drag link and tie rod to idler arm before tightening idler arm bolt to 62ftlbs, so I may be over thinking problem. I did notice the steering wheel center is not level heading straight, its rotated a bit to right.
__________________
86 300SDL
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page