|
|
|
#1
|
|||
|
|||
200d data
where to find it for a 68 200 diesel, rpm rating, idle, timing, is this a 60 hp?
|
#2
|
|||
|
|||
You will need to specify which model you have. There were two 200D models in 1968, the W110 fintail body and the 200D/8 W115 body.
|
#3
|
|||
|
|||
it is a w110 fintail 200d
|
#4
|
|||
|
|||
68 200d
w110 has a manual four speed in the floor, would it be engine type om621.918? |
#5
|
|||
|
|||
Quote:
Idle RPM: 700-800 Injection Pump Timing: 26 degrees before top dead center Valve Clearance: .004" Intake, .016" Exhaust (cold engine) Engine: OM621.VIII (621.918) Horsepower: 60 @ 4200 RPM Torque: 87 @ 2400 RPM |
#6
|
|||
|
|||
need oil filter kit, cant find 200d kit. will 220d kit work?
|
#7
|
|||
|
|||
Not sure if the 220D will fit (I think it depends on the type of canister fitted), but I'll let you in on a little secret. The filter is the same as used on a 1939 to 1952 Ford tractor, models 9N, 2N, and 8N. Any parts house should be able to get it. The only catch is that the sealing gasket/o-ring for the housing is not the same. You will either need to reuse the o-ring from your car or buy a new o-ring from a Mercedes parts dealer. The o-rings can usually be used several times before they leak. The washer on the canister bolt usually never leaks. Best to buy several extra o-rings and drain plug washers instead of just one.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|