|
|
|
#1
|
|||
|
|||
'65 190DC piston to cylinder wall clearance?
Anyone know? No documentation came with the pistons...A standard measurement would be appreciated.
Thanks a ton! |
#2
|
||||
|
||||
I can get it for you in the morning. I've gone through this with my 65 220Sb. See my thread.
220S M180 Engine Work
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
#3
|
|||
|
|||
If you could, that would be fantastic, Warren.
Thanks, Keenan |
#4
|
|||
|
|||
Quote:
Piston Sidewall Clearance: 0.07mm (0.0027") |
#5
|
||||
|
||||
From my piston box, 1st oversize, cylinder 80.5, piston diameter 80.46 so do the math.
__________________
Regards Warren Currently 1965 220Sb, 2002 FORD Crown Vic Police Interceptor Had 1965 220SEb, 1967 230S, 280SE 4.5, 300SE (W126), 420SEL ENTER > = (HP RPN) Not part of the in-crowd since 1952. |
#6
|
|||
|
|||
...appreciate the help, gentlemen.
|
Bookmarks |
|
|