Quote:
Originally Posted by Greta
That's it exactly. And for the record, it took a MAPP gas torch, a good air hammer wrench, a 3/4" ratchet designed for 18-wheelers, and about three days of soaking.
F@*%$&# Loctite.
----------
We did find one through the dealership, but there's a 10-day wait on it.
So much for getting it back on the road this weekend.
Thanks again for your help, everyone.
|
That kind of heat destroys Loctite so I after heating I do not think that it was the loctite holding it in.
All I was doing was removing the allen Head bolts to remove a fuel filter housing at the junk yard and it broke the allen socket. I had to pound on the heads with a ball peen hammer and a punch to remove the 2 bolts. No Loctite on them.