|
|
|
#1
|
||||
|
||||
603 IP help
i got an IP from junkyard that i put in a 300D. for some reason the "stop" seems like its having a problem with the spring, it wont pop back to where its supposed to. any suggestions before i have to remove the IP and dismantle it?
__________________
1985 300D - "Desi" 1981 300D - "Pepi" 1984 240D - "Sticky" 1985 300TD - "Flitstone" 1984 300TD - "Frenchie" 1987 300TD - "4481" |
#2
|
||||
|
||||
Sad day when your lever won't come up.
Is it okay with the vacuum line disconnected? If not, perhaps the o-ring is dry, try a little fuel on the o-ring.
__________________
Gone to the dark side - Jeff |
#3
|
||||
|
||||
also, i am having problems with the idle, the car will rev, but wont idle. is that related?
i need more input people. im stuck
__________________
1985 300D - "Desi" 1981 300D - "Pepi" 1984 240D - "Sticky" 1985 300TD - "Flitstone" 1984 300TD - "Frenchie" 1987 300TD - "4481" |
#4
|
||||
|
||||
Is the EDS connector hooked up? Are you sure EDS is working?
Does the stop lever come up when you remove the vacuum line to the actuator? If so, you might have a bad key switch. Sixto 87 300D |
Bookmarks |
|
|