W201 - what sensors needed for Cruise Control?
I just got my '93 190E body / '87 190D 2.5T engine / '84190D 2.2 transmission project on the road. Needless to say, this was a bit of a major project, but the car turned out great.
I am now working on some of the "finishing touches", one of which is the cruise control. Can anyone tell me what sensors are required in order to make the cruise work? I have the Hall Effect "terminal block", with 4 male connectors and 1 green/yellow wire going to the back of the speedo. Which sensors need to get attached to this "terminal block"? Any help would be greatly appreciated. SteveM. |
1 Attachment(s)
That sounds like a great project! Be sure to post some pictures of how it turned out; I'd like to see it.
Here is a copy of the cruise wiring diagram for a manual transmission 190D. I added a bunch of notes to it when I was working on the cruise control a while ago since the info was kind of scattered in the FSM. Hopefully it helps... :) |
All times are GMT -4. The time now is 07:53 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website