Anyone run Euro plates along with state plates? Just got an old German plate for my SD, trying to figure out mounting options.
If anyone has pictures of a w126 with euro plate I would like to see.

__________________
81 300SD daily driver/project
86 420SEL (sold)
85 380SE(in the graveyard)

Yup, my dad and I both do. Here's a recent pic of my car:



The plate was on my grandfather's car in Germany until he passed away in January. "RW" are his initials. My dad has the other plate on his car.

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)

If you have the Euro bumper, then you will need the plastic mounts that connect the plate to the bumper. If it's the DOT bumper, you will need to fashion a bracket, drill 2 screw holes in the plate, and mount it that way.
I have a Euro plate on my W123 front end, but it has my real numbers stamped in it along w/real stickers.

__________________

Don't Chrome them; polish them

Ours are mounted in the official euro plate holders (my dad brought a couple home) mounted to the bumper (through it) with two bolts in the back....works very well.

__________________
-diesel is not just a fuel, its a way of life-
'15 GLK250 Bluetec 118k - mine - (OC-123,800)
'17 Metris(VITO!) - 37k - wifes (OC-41k)
'09 Sprinter 3500 Winnebago View - 62k (OC - 67k)
'13 ML350 Bluetec - 95k - dad's (OC-98k)
'01 SL500 - 103k(km) - dad's (OC-110,000km)
'16 E400 4matic Sedan - 148k - Brothers (OC-155k)

I do precision sheet metal for a living so I figured I would make a mount, just wanted to see how others are mounting them. I have to run a state plate too, so thats going to be a bit tacky but oh well.

__________________
81 300SD daily driver/project
86 420SEL (sold)
85 380SE(in the graveyard)