Which brand is better? Or is there any difference between the brands? My engine mounts are basically literally gone... so I'm getting new ones. Should I get Lemfoerder, Corteco or Meyle? I'll be ordering them in the next few hours... so any tips are really appreciated!!!!

And yes I have used the search button... from that I've only gotten a partial answer so far... if I don't get anything else I'll go with that.

__________________
Proud owner of an '83 300SD... Currently named "Cacela"

Lemforder or Meyle. The experience I had w/ Corteco was not a good one. They lasted less than a year.

Also check the condition of the engine shocks and the tranny mount while you are at it.

__________________
RRGrassi


70's Southern Pacific #5608 Fairmont A-4 MOW car

13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete.

91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K

90 Dodge D250 5.9 Cummins/5 speed. 400K

If your engine mounts are gone and have to be replaced, check your lower oil cooler line. Make sure that the belt hasn't cut into it. If it has, replace it at the same time.

__________________
Big Fred

(RIP Sept '10) 83 300SD Turbo Diesel (aka "Rocky")
(RIP April '10 - Accident) 86 Chevy M1009 CUCV (Blazer) - 6.2L Diesel (aka "Ogre")

Well, I ordered a set of the Lemfoerders... the other mounts and shocks will have to wait until I get a job... mom is only letting me borrow so much...

__________________
Proud owner of an '83 300SD... Currently named "Cacela"