Hello
Looking to replace the transmission filter on my 1984 300D. Anybody know what size Torx to use to drain the Pan.

Thanks As Usual

BB

__________________

1972 SILVER 280SE
1989 SILVER 300 SEL
1984 DARK BLUE 300D EURO

It is not a Torx bit. It is a regular allen (hex) bit. Pretty sure it is 5mm, but may be 6mm.

__________________
2009 ML320 Bluetec
1985 300CD
1981 300TD

Past Mercedes
1979 300TD
1982 300TD
2000 E320 4Matic Wagon
1998 E430
1984 300SD
1980 300SD

1984 300d turbo
5 mm allen, trans and torque convertor drain plug, use a 27 mm to
turn front crank to line up 5 mm torque convertor drain plug

Make sure that you throughly clean out the hex hole and the driver makes a deep and positive contact. These plugs strip out very easily and there is a gasket or crush washer under the plugs that should be replaced.

__________________
Dave
1983 300D Daily Driver