|
|
|
#1
|
|||
|
|||
OM606 Intake air temp Code P0111
Hello all, I recently removed the crossover pipe and intake manifold and cleaned them up along with the 3 flaps, EGR and all related parts. After putting it all back together I am getting the above mentioned code. Is there a temp sensor for this that I may have not reconnected? Where is this part? I am pretty sure everything was reassembled correctly. I wonder if the sensor is in one of those flapper assemblies that I removed and cleaned? I replaced all of the O rings and gaskets for everything ( thanks Phil ). Any ideas guys? The car is a 97 E300D with 190K on it and runs perfect. My Auto Xray 5000 scanner is telling me that the Intake air temp is -40 F. Thanks all.... Jim
__________________
1997 E300D Wife's daily driver 1985 300SD my daily driver 1999 Expedition family road trip and material hauler |
#2
|
||||
|
||||
It may only be of marginal help but the IAT sensor is just upstream of the EGR on my car. My intake is quite a bit different though but it may give you a starting point.
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250 |
#3
|
|||
|
|||
Thanks Kartek, it is worth a gander. I will check it out tomorrow before the football games. I tried to find the part on EPC just to see what it looks like but no luck. ....Jim
__________________
1997 E300D Wife's daily driver 1985 300SD my daily driver 1999 Expedition family road trip and material hauler |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|