|
|
|
#1
|
||||
|
||||
Better gear ratio for W123 Diesel – What axle would fit ??
15" wheels should help the MPG on my 300TD I mounted 15" steel rims with 205/75 tires. The RPM dropped by 10% so I hope I get some better than 20MPG. The ride is super nice on the highway and the tires are stiff enough for stability.
1. What differential could I use for better gear ratio?? 2. In what other models can I find that differential ?
__________________
Good Patina Comes With Good Miles Driven. Drive more polish less 220SEB 1963 (excellent driver with no rust but far from pretty) 300 TD Wagon 1981 (Daily Commuter Tractor) 911 MFI 1973 www.vintagemotion.com |
#2
|
||||
|
||||
2.88 that was used on the '85 w123 and w126. You will need the '85's speedometer as well.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#3
|
||||
|
||||
What ratio does my 1981 300TD wagon have now?
__________________
Good Patina Comes With Good Miles Driven. Drive more polish less 220SEB 1963 (excellent driver with no rust but far from pretty) 300 TD Wagon 1981 (Daily Commuter Tractor) 911 MFI 1973 www.vintagemotion.com |
#4
|
||||
|
||||
I'm guessing 3.07. It is stamped on the bottom of the rear diff, I just do not remember if it is the left or right corner. You can see it just below the rear diff cover. Of course it needs to be cleaned to read it.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#5
|
|||
|
|||
If you're getting only 20mpg then you're either driving it VERY hard or there are problems dragging down its efficiency.
Search the forum for suggested maintenance points. |
#6
|
||||
|
||||
I don't think mpg is as related to rpm on a diesel as it is on a car. It takes a set amount of POWER to move the car x distance at y speed based on the rolling resistance of the tires and aeordynamic drag. That power requirement when factored with the efficiency of the engine gives fuel economy.
Increased resistance in any way (dragging brakes, added roof racks, who knows what else) will decrease economy, so will decreasing the efficiency of the engine with things like bad thermostats.
__________________
Sadly Benz-less |
#7
|
||||
|
||||
The same diesel engine will use more fuel running 3000 rpm vs 2500 rpm, going the same mph.
All the other stuff stated will also factor in.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#8
|
|||
|
|||
I couldn't imagine only getting 20 mpg.
I think the worst I have ever gotten is around 25 in town with a lead foot. I think I would look into the maint. things too Brakes dragging, injectors, tire pressure, etc.
__________________
81 Mercedes 300SD 289k.......SOLD 82 Mercedes 300CD 252k......slow ride 82 mercedes 300 SD...mi Unknown 83 Mercedes 300D ????ksniff..gone too 84 Mercedes 300D 148k........SOLD 85 Mercedes 300TD 386k and holding some one elses project |
#9
|
||||
|
||||
Quote:
Next week I will try my MPG going no faster than 65...we will see. Still hoping to find a 2.88 axle ....would a 300SD axle fit?
__________________
Good Patina Comes With Good Miles Driven. Drive more polish less 220SEB 1963 (excellent driver with no rust but far from pretty) 300 TD Wagon 1981 (Daily Commuter Tractor) 911 MFI 1973 www.vintagemotion.com |
#10
|
||||
|
||||
Quote:
the 2.47 I have is from a w126, you just have to flip the rear mount. also, when you pull the rear make sure you keep the axles shims as they are sized to the diff.
__________________
1982 300CD Turbo (Otis, "ups & downs") parts for sale 2003 TJ with Hemi (to go anywhere, quickly) sold 2001 Excursion Powerstroke (to go dependably) 1970 Mustang 428SCJ (to go fast) 1962 Corvette LS1 (to go in style) 2001 Schwinn Grape Krate 10spd (if all else fails) Last edited by lutzTD; 11-14-2008 at 07:09 PM. |
#11
|
||||
|
||||
you need to calculate your effective gear ratio. if it actually reduces rpm 10% then the actual mileage is 22. likewise the speed will be higher so if it reads 60 the actuak would be 66.
the 81 is na so the diff would be 346.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#12
|
|||
|
|||
Look in the resources tab above and click on DIY articles. A good write up on R&R a Diff.
See Post #2 above for 2:88. Charlie
__________________
there were three HP ratings on the OM616... 1) Not much power 2) Even less power 3) Not nearly enough power!! 240D w/auto Anyone that thinks a 240D is slow drives too fast. 80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works |
#13
|
|||
|
|||
For the 300D/CD, yes. The 300TD was the first non-300SD turbo in 81 so it should be 3.07.
|
#14
|
||||
|
||||
Actually, according to my mb illustrated buyer's guide the cd was turob in '81 too. I wouldn't be surprised if it was a mid year change over.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#15
|
|||
|
|||
I have yet to see a genuine one.
|
Bookmarks |
|
|