Cruise control stalk
 

Hi,
i have a w124 300D 87/88 model.

Does any one know the pin outs / wire color of the stalk control?

Also are they simple momentary switches or are they interconnected with resistors, diodes etc?

Any help appreciated

From the switch to the connector above your left knee is as follows:

green with yellow stripe = +12V when on, no voltage when off
blue = resume
yellow = decelerate/set
green = accelerate/set

No diodes or resistors from the switch to the cruise amp connector in the diagram.

I had the cruise amp solders reflowed only to discover a plastic socket in the linkage between the cruise actuator and IP had broken off.

Sixto
87 300D

info here also. http://gdl-online.com/test024.html