I need a good condition grey driver chair for my 87 300td,i have found a very nice set form a gas w124 but the motor pins dont match,does anyone here kn ow what yr 124 seats swap with the diesel w124 1987??
Thanks

86-89 should have the same connectors but you have to replace memory with memory and non memory with non memory.

It's not too difficult to transfer the seat cushion and seat back to a different track. It's not fun but not difficult. I have a set of seats out of a 92 300E in my 87 300D. The memory connectors from 90 are different so I transferred the 92 seat to my 87 memory track. I didn't have to change the non memory passenger side track.

Plug - the original light gray leather seats of my 87 300D are still available!

Sixto
87 300D

I bought an '88 TE seat to put in my first '87 D, and the connection was different. I'm guessing '86 and '87 are the same only.

__________________

Gone to the dark side

- Jeff

Early 90's W124 non-memory seat plugs were the same as '83 W126. Bottom seat mounting was different (easily modified) as was the seat base (modifiable but with slightly more difficulty).

Just change the seat cover and tune up the seat while you have it off. I found 2 broken springs in mine and some chaffed wires. I have a copy of the ************** seat book if you want to borrow it. Send me a PM. Uh-oh, I used a bad word. Mercede$$ource

__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI


Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous

“Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss