Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-07-2009, 06:12 PM
Registered User
 
Join Date: Aug 2008
Posts: 18
84 300 SD cold misfire

My 300 sd misfires or stumbles every few seconds until it warms up. I replaced the glow plugs and it still does it.
Should I replace the injectors? Motor runs perfect other than that.

Reply With Quote
  #2  
Old 01-07-2009, 08:18 PM
Registered User
 
Join Date: Nov 2004
Location: Nova Scotia, Canada.
Posts: 6,510
I would start by adjusting the valves. If that was not an issue then perhaps you could send your injectors out for a test. No sense buying replacements unless the present set are bad.

If your fuel milage is also substandard make sure your base injection pump fuel supply is in the right pressure range. This can effect idle it appears. Also you might even be proccessing a little air after initial startup. Chain stretch with cam and injection pump in poor time is also a possibility. Just lots of possibilities.
Reply With Quote
  #3  
Old 01-07-2009, 08:31 PM
bgkast's Avatar
Rollin' on 16s
 
Join Date: Dec 2005
Location: Vancouver WA
Posts: 6,528
Mine does this exact same thing. The idle is also low at start-up. All my GPs are new too. I may pull out the injectors and test them this weekend. I'll post back with the results.

__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver

1982 300SD - 232K miles - Wife's Daily Driver

1986 560SL - Wife's red speed machine
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 11:20 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page