|
|
|
#1
|
|||
|
|||
Basic seat question 300SD
Is the drivers seat normally an inch or two higher then the front passengers?
Mine sure appear to be even after Noodling the passengers side and not doing the drivers side. Maybe this is how it is designed. I wanted to ask.
__________________
1982 300SD |
#2
|
|||
|
|||
Just a few questions:
- Are both seats adjusted to the full down position? - Are both seats at roughly the same fore-aft positioning? [These first two can make a difference how they appear.] - Is there an additional lift block mounted under the rails for the seat? (this is sometimes done for those of shorter stature)
__________________
Big Fred (RIP Sept '10) 83 300SD Turbo Diesel (aka "Rocky") (RIP April '10 - Accident) 86 Chevy M1009 CUCV (Blazer) - 6.2L Diesel (aka "Ogre") |
#3
|
|||
|
|||
Sorry for the late reply. My seats don't go UP and DOWN. They are same front and aft position.
I'll look for a raiser block on drivers side.
__________________
1982 300SD |
#4
|
||||
|
||||
They should go up and down if they are not broken.
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#5
|
|||
|
|||
I need to look at owners manual then. Thanks
__________________
1982 300SD |
#6
|
|||
|
|||
Wow, did not know they were 3-way power seats! They both work. Thanks.
__________________
1982 300SD |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|