|
|
|
#1
|
|||
|
|||
Vacuum pump on 93 300d
Hi all first post. Have a 1993 300d /186,000 miles and am wondering if I should replace the vacuum pump? Dont know if it is original but it works fine with no noise. Is this rebuildable or should I replace it? Could someone suggest where to get parts/pump,Thank you.
|
#2
|
|||
|
|||
If you are asking about replacing it as preventive maintenance because of its age I have read stories of these pumps breaking and causing major engine damage when the bearings and other debris from a busted pump find their way to the timing chain etc. I am not sure which model benz this has happened to. Maybe someone out there can chime in on this. Jim
__________________
1997 E300D Wife's daily driver 1985 300SD my daily driver 1999 Expedition family road trip and material hauler |
#3
|
|||
|
|||
The conventional wisdom here is to replace them at about that mileage. AFAIK they are not rebuildable. I replaced mine at 200,000. If you do a search there are threads about vacuum pump failures.
__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous “Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss |
#4
|
||||
|
||||
Get a New One.
Replace it.
You have a PM (Private Message) click on link upper right under your name.
__________________
'84 300SD sold 124.128 Last edited by compress ignite; 04-01-2009 at 03:46 AM. |
#5
|
|||
|
|||
I searched the threads and it seems if it has the sealed bearing/new style there is no danger of bearing coming apart. Is this true? Pump works and sounds perfect so I would rather not replace unless it can break like early style. Again it is a 1993 300d with 186000 miles.Thank you.
|
#6
|
||||
|
||||
NEW STLYE Vacuum Pump [Poof!]...
I am not trying to sell you a vacuum Pump.
I am however informing you of the risks. GSXR's Vacuum Pump Explosion Thread: OM603: Vacuum pump explosion, bearing intact! Injection Pump Timing device wrecked All Photographs courtesy gsxr:
__________________
'84 300SD sold 124.128 |
#7
|
|||
|
|||
Thanks Compress Ignite and everybody else. I did see that thread and did not catch it right away that the pump had a sealed bearing but broke elsewhere. Guess that answers my question.Pump has been ordered this morning.Thanks again.
|
Bookmarks |
|
|