I have a vibration at Idle. When I accelerate is Not a Vibration. Above 800 RPMs no vibration. Could be a Broken Engine Mount. Any suggestion. . Does this Engine has some Dampers or Shocks like The SDL's. Thanks For the INFO.

FErnando Q

No "Engine Shocks".
Two (2) motor mounts (Hydraulic)...Test is: whilst underneath be able to fit a
13mm measuring device [anything 13mm tall will do] between the bottom of the
MM and the Body rail. If you cannot , the mount's collapsed internally.

The single suspended rubber transmission mount does double duty as a rear
engine mount also.

WHOA, see if your white plastic bushings (In your transmission shifter linkage)
are worn or missing , First! (Parts number 17 and 188 in the Cyrillic Pictogram)

Attached Thumbnails

 

__________________
'84 300SD sold
124.128

I fund one of the Engine mounts looks like it is not complete OK. I will change it next Week

Thanks

FQ

The other MM is going soon, Age.
'Best to replace in pairs.

Oh, I was wrong the FSM 2 CD set must be ordered from the local dealer.

Try here:http://www.detali.ru/cat/oem_mb1.asp?TP=1&F=124128&Cat=15S

or here:http://www.w124performance.com/images/

__________________
'84 300SD sold
124.128