|
|
|
#1
|
||||
|
||||
seat switch confusion...
Ok, I got some used seat switches and installed them. They do not work the correct functions.
The seat tilt, is running the back of the seat. What did I do? or what needs to be done? Also the seat is out new to the 82 from the 85. Is it a wire issue on the bottom of the seat? Any drawings? thanks Doug
__________________
83 300SD Dark Silver Dark brown inside |
#2
|
|||
|
|||
Just change the wires on the switch to keep things like original. Or you can switch the pins in the seat connector.
|
#3
|
||||
|
||||
would the seat bases be wired different from 82 to 85?
__________________
83 300SD Dark Silver Dark brown inside |
#4
|
||||
|
||||
In my '82 the wires are soldered in, but I believe later years use a plug on the switch. Maybe they changed the pin layout at the same time
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
Bookmarks |
|
|