Hi all, I have a 300TDT (1987) and the rear windows stopped working. The drivers side has no power to the plug and the passenger side has power but will not go up and down. Not sure if the problems are related. The fuses are good, the front work fine and the switches are good as I have a couple new ones I tried. Does anyone know if I can do a continuity test from the front switch to the door switch? If so what pins would or should give continuity? Also will regulators from a 1990 300E fir my 87?

I guess no one knows anything about windows.

Hold the switch down while swinging the door open/closed, common failure is the wiring in the hinge area.

__________________

Gone to the dark side

- Jeff

What he said. I found mine broken in the rubber sleeve that goes from the door to the b pillar. My driver side was broken, so far the passenger side is OK.

__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI


Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous

“Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss

OK I will certainly try that, Thanks. If anyone know what wires to check from the front switches to the rear, That would be great.

__________________
Jimmy L.
'05 Acura TL 6MT
2001 ML430 My Spare

Gone:
'95 E300 188K "Batmobile" Texas Unfriendly Black
'85 300TD 235K "The Wagon" Texas Friendly White
'80 240D 154K "China" Scar engine installed
'81 300TD 240K "Smash"
'80 240D 230K "The Squash"
'81 240D 293K"Scar" Rear ended harder than Elton John

You are really slipping! It took you 5 days to find this post. Is you search light broken?

__________________
1987 300TD 309, xxx 2.8.2014 10,000 mile OCI


Be careful of the toes you step on today, as they may be connected to the ass you have to kiss tomorrow. anonymous

“Be who you are and say what you feel, because those who mind don’t matter, and those who matter won’t mind.” Dr. Seuss