Does anyone have a outlet for monark injector nozzles?
Heard alot about them they are good and inexpensive.
************** only has them for 1995 or older, i have a 1996 606 engine. Thanks.

Last time I checked Monark does not make nozzles for the OM606. I rebuilt a set for a member using Bosch Nozzles.

__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver

1982 300SD - 232K miles - Wife's Daily Driver

1986 560SL - Wife's red speed machine

Have bgkast take care of your injectors for you - you will not be dissappointed!

I'm truly amazed at how much better my car runs now.

Bryan can tell you - my injectors were SHOT!

__________________
95 E300 Diesel 265k and counting

okay , how much to rebuild and calibrate?
When you rebuild do you cahnge springs or just clean?
Shim if needed so all pop test within 5 psi. ?
thanks

He's Taking a break . . . in his sig line it says "Injector Testing and Rebuilding Service - On Vacation from injectors for the month of May"

thanks

They don't need to be within 5psi. It would be very hard to do that. 25psi is reasonable. (The pop at over 2000 psi)

__________________
1991 350SD (updated rods)
Biodiesel B100 when I can find it.
Dino when really cold outside

I clean them, lap the mating surfaces, install new nozzles and balance them to within 3 BAR. Contact me next month..I've got a 24 hours of Lemons car that's taking all my free time right now.

__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver

1982 300SD - 232K miles - Wife's Daily Driver

1986 560SL - Wife's red speed machine

thanks ill contact you in june. Thanks

The N/A and Turbo 606 use different nozzles.

Monark make nozzles for both types. Which ones do you need, I can prolly source them....

__________________
http://i190.photobucket.com/albums/z...0TDnoplate.jpg

Alastair AKA H.C.II South Wales, U.K. based member

W123, 1985 300TD Wagon, 256K,
-Most recent M.B. purchase, Cost-a-plenty, Gulps BioDiesel extravagantly, and I love it like an old dog.

W114, 1975 280E Custard Yellow,
-Great above decks needs chassis welding--Really will do it this year....

need nozzles for a 606 na
let me know thanks.

Do you have the actual Nozzle numer to confirm my data?

Ny info says the DN O SD 314--This is the Bosch part-number that I can cross-reference to monarch from

__________________
http://i190.photobucket.com/albums/z...0TDnoplate.jpg

Alastair AKA H.C.II South Wales, U.K. based member

W123, 1985 300TD Wagon, 256K,
-Most recent M.B. purchase, Cost-a-plenty, Gulps BioDiesel extravagantly, and I love it like an old dog.

W114, 1975 280E Custard Yellow,
-Great above decks needs chassis welding--Really will do it this year....