|
|
|
|
|
#1
06-16-2009, 10:11 AM
|
|||
|
|||
|
603 parts compatibility with 606??
Hey guys,
I have blown motor on a '95 E300D, ~175K miles. I've decided to rebuild it. I have an '87 300D with the OM603. Before I pull the old motor out, I want to know if I can I scavenge parts from that motor? Specifically: crankshaft, piston rods, oil pump, oil pan, timing gears?
__________________
Josh Ace Taxi Bangor, ME Cab 2: '87 300D Cab 3: '92 300D Cab 4: '90 300E 4Matic Wagon Cab 6: '96 E300D Cab 7: '87 300TD Cab 8: '91 300E 4Matic Wagon Cab 9: '98 E320 4Matic Wagon Cab 10: '98 E300D Cab 11: '98 E320 4Matic Wagon '96 Suburban 6.5 Turbodiesel 
|
|
#2
06-16-2009, 11:29 AM
|
||||
|
||||
|
I'm pretty sure at least the rods are compatible. I'd also be curious to see what other internal parts cross over.
__________________
-Evan Benz Fleet: 1968 UNIMOG 404.114 1998 E300 2008 E63 Non-Benz Fleet: 1992 Aerostar 1993 MR2 2000 F250
|
|
#3
06-16-2009, 11:38 AM
|
|||
|
|||
|
According to my parts supplier, the crankshaft is usable, which, if true, will save me $2K. It's worth it to pull the motor just for the crank; maybe we'll have to see about the rest after we've opened it up.
__________________
Josh Ace Taxi Bangor, ME Cab 2: '87 300D Cab 3: '92 300D Cab 4: '90 300E 4Matic Wagon Cab 6: '96 E300D Cab 7: '87 300TD Cab 8: '91 300E 4Matic Wagon Cab 9: '98 E320 4Matic Wagon Cab 10: '98 E300D Cab 11: '98 E320 4Matic Wagon '96 Suburban 6.5 Turbodiesel
|
|
#4
06-16-2009, 12:57 PM
|
|||
|
|||
|
Why is the 87 300D only good for its parts?
__________________
1986 300 SDL - rolling parts car and test bed. 1987 300 SDL - semi daily driver. 1977 U1000 Unimog 2007 Ram 2500 6.7l
|
|
#5
06-16-2009, 10:14 PM
|
||||
|
||||
|
List the parts you want to know about. Look up the same parts for both years/models at your favorite internet parts source. And, compare the part numbers to see if they are the same.
__________________
84 300D, 82 Volvo 244Gl Diesel
|
 |
| Bookmarks |
|
|
Linear Mode
