|
|
|
#1
|
|||
|
|||
Turbo Question
Hi
I am installing a 617.950 into my 300D and have a few questions about the turbo boost protection 1. I have one line coming from the Intake and one from the Alda. What unit do these meet up at. 2.The intake has a switch for boost control where does this wire to?. Same unit as above?. 3.There is a second threaded hole just below the plastic line described in 1 above, What goes there? Thanks
__________________
1979 300D. |
#2
|
||||
|
||||
This may help some..
Number "20" is the pressure switch Number "21" is the switchover valve. Letter "A" goes to the #15 fuse Now Letter "B" has two wires. One connects the pressure switch to the switchover valve, but I cannot determine were the second wire ends up. On your third question, I believe you are seeing the mount for the automatic transmission dip stick bracket. .
__________________
1983 123.133 California - GreaseCar Veg System |
#3
|
|||
|
|||
Looking at the wire diagram for a 80 SD, It looks like the extra wire goes to an Overload protection module, Which also can control the overload relief valve. I can live without that.
Thanks for your info
__________________
1979 300D. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|