PeachParts Mercedes-Benz Forum
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Found a great looking 300CD, one problem. (http://www.peachparts.com/shopforum/diesel-discussion/255012-found-great-looking-300cd-one-problem.html)

nickofoxford 07-20-2009 01:50 PM
Quote:
Originally Posted by charmalu (Post 2250796)
At the begining of this thread some one asked about shifter bushings, did you look at them to see the condition of them? I just scaned through the 4 pages, and don`t see mention of them.

Charlie
I checked them and they're loose but the linkage will sill engauge every gear and even set the park pawl, so they can't be too bad.

carnut 07-23-2009 03:09 PM
I THINK THE REAR END IS BROKEN. REMOVE THE REAR COVER, INSPECT RING GEAR AND PINION OR CHECK IF ONE OF REAR REAR DRIVE AXLES HAS A SHEARED CV JOINT.

nickofoxford 07-24-2009 05:34 PM
Quote:
Originally Posted by carnut (Post 2253263)
I THINK THE REAR END IS BROKEN. REMOVE THE REAR COVER, INSPECT RING GEAR AND PINION OR CHECK IF ONE OF REAR REAR DRIVE AXLES HAS A SHEARED CV JOINT.

I'll have to check that out. Do you know if the rear end could slip? I jacked the whole rear end of the car up and spun one tire and the other rear tire on the other side would spin the other way. So I thought the rear was good. But maybe im wrong?:confused:


All times are GMT -4. The time now is 07:32 AM.
Page 2 of 2 1 2
Show 50 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website