Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-26-2009, 02:10 AM
anarchy's Avatar
Registered User
 
Join Date: Dec 2006
Posts: 160
Fix and Improve Front and Rear window sliders with out having to replace the motor

I couldn't think of anything else but I was able to find a solution to fixing the windows on the w126. To make sure they never brake again I reinforced the nylon with a washer in the back so if it broke the metal washer would still be there.

First off you need to take an angel grinder and get the surface ready for drilling.




I bought a bunch of nylon bushings and chose to use the black ones because they were the thickest, also you cannot use nylon lock washers because you have no way to tighten them simply use 2 nuts


I reinforced it with a metal washer just incase..


Then all you need to do is use a bunch of greese and they will work better then the factory because these can actually roll ...

these are some of the other washers i considered using I was thinking about carving them out to fit

__________________
1969 230 inline 6 dual carb 60,000 Miles 2nd Owner doesn't run right
1982 300 SD 455K - my reliable commuter car
1990 190E needs new crank shaft ran it out of oil
1996 C220 bad wiring harness

Last edited by anarchy; 06-26-2009 at 02:48 PM.
Reply With Quote
  #2  
Old 06-26-2009, 03:58 AM
Registered User
 
Join Date: May 2007
Location: Out in the Boonies of Hot, Dry, Dusty, Windy Nevada
Posts: 9,585
I just got my new 23 inch flat screen monitor up and running. I thought, Damn, I got to turn down the resolution some.

WOW, you have some large close up pictures. makes it a little hard to comprehend what you are doing. first I thought you were replacing the sliding Jaw that is common to break. now Iam not sure.

How did you get such large pictures posted?

Charlie
__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works
Reply With Quote
  #3  
Old 06-26-2009, 02:51 PM
anarchy's Avatar
Registered User
 
Join Date: Dec 2006
Posts: 160
yeah i took the pictures with my camera phone 5megapixel i dont know how they ended up this huge. anyways, you know when your window falls off the track and you go to repair it, you find out that that little plastic part is irreplaceable this is the fix for it.
__________________
1969 230 inline 6 dual carb 60,000 Miles 2nd Owner doesn't run right
1982 300 SD 455K - my reliable commuter car
1990 190E needs new crank shaft ran it out of oil
1996 C220 bad wiring harness
Reply With Quote
  #4  
Old 06-26-2009, 06:21 PM
tyl604's Avatar
Registered User
 
Join Date: Feb 2008
Location: Atlanta, GA
Posts: 2,934
Assume this is the sliding jaw repair? Do you have pics showing how this attaches to the metal arm and how it fits into the slider?
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page