|
|
|
#1
|
|||
|
|||
Sounds coming from shifter...
Right before the car shifts into any gear, i hear a rattling, then it disappears then comes back right before car shifts again. Do the bushings need to be replaced?
Another Question. I had the a tie rod replaced and the lower ball joint on the right side. Ever since then it has a viberation that comes in 2 sec intervals. The vibe is not to bad but it is annoying and i want it gone. Any ideas?? 300d turbo |
#2
|
||||
|
||||
Ideally, ball joints, tie rods, bushings, bearings shoud all be replaced in pairs.
Where do you feel the vibration? Was the front end aligned after the repairs?
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#3
|
|||
|
|||
The vibration comes from the center console i think. And yeah it was aligned after.
|
#4
|
||||
|
||||
Check the plastic transmission bushing under the car, I had a vibration that was driving me nuts, put in a new one, it's fine now.
I've replaced various front end components on just one side, no issues. Swap tires, see if the vibration moves.
__________________
83 SD 84 CD |
Bookmarks |
|
|