Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-04-2009, 02:22 PM
Registered User
 
Join Date: Apr 2003
Location: oregon coast
Posts: 50
replaced shifter bushings now won't start

This is on my 83 3ootd. About says it all. What went wrong ? Any ideas ?

I replaced the shifter bushings, really tight quarters, but got her done.

Went to start it up, and we all dead in the water. Starter won't turn over at all.
Got plenty off juice in the battery. Everything works ok till I try ti start it up.

All the lights comes on just fine, glow plugs, ect... WHERE DID I SCREW UP ?

Reply With Quote
  #2  
Old 09-04-2009, 02:26 PM
toomany MBZ's Avatar
Registered User
 
Join Date: Nov 2006
Location: central Va
Posts: 7,820
Make sure you're in neutral or park. If so, you may have dislodged the Neutral Start Switch.
__________________
83 SD

84 CD
Reply With Quote
  #3  
Old 09-04-2009, 02:39 PM
Registered User
 
Join Date: Apr 2003
Location: oregon coast
Posts: 50
Boy thanks for the quick reply. AND THAT WAS IT. Thank you very much.
Reply With Quote
  #4  
Old 09-04-2009, 03:04 PM
bhatt's Avatar
Registered User
 
Join Date: Apr 2000
Location: Oakville, Ontario, Canada
Posts: 421
NSS?

Did you unplug or mess up the wiring on the neutral safety switch?

Allows the car to only start in Park or Neutral. If the switch is faulty, you won't be able to start at all (everything lights up normally, but no juice to the starter).

If it's all plugged in ok, perhaps you whacked the switch with your wrench while under the trans. Try unplugging and jumping the switch. If the car starts, you have a bad switch. Make SURE not to drive the car with it jumpered, because you can now start it in any gear!!
__________________
'83 300SD 335,000km (207k) mi SOLD
'87 560SL 163,000km (101k mi) SOLD
'86 300SDL 356,000km (220k mi) SOLD
'92 500SEL 250,000km (155k mi) SOLD
'90 300SL 140,000km (87k mi) SOLD
'01 S430 260,000km (161k mi) SOLD
'03 SL500 167,000km (104k mi) SOLD
'07 S550 4MATIC 235,000km (146k mi) SOLD
'07 GL320 CDI 4MATIC 348,000km (215k mi)
'13 GL350 BlueTec 4MATIC 170,000km (105k mi)
'14 SL550 72,000km (43k mi)
Reply With Quote
  #5  
Old 09-04-2009, 10:13 PM
Johnhef's Avatar
Senior Member
 
Join Date: Feb 2005
Location: Frederick, Md
Posts: 4,540
This commonly happens when replacing the bushings- the car wont sit fully in park anymore with good new bushings and therefore wont let it be started, if its not fully right now with the new bushings, remove the shift rod and adjust its length accordingly.

__________________


1980 500SE/AMG Euro
1981 500SEL Euro
1982 380SEL
1983 300TD
1983 500SEC/AMG Euro
1984 500SEC
1984 300TD Euro
1986 190E 2.3-16
1986 190E 2.3
1987 300D
1997 C36 AMG
2003 C320T 4matic

past: 1969 280SE 4.5 | 1978 240D | 1978 300D | 1981 300SD | 1981 300SD | 1982 300CD | 1983 300CD | 1983 300SD | 1983 380SEC | 1984 300D | 1984 300D | 1984 300TD | 1984 500SEL | 1984 300SD | 1985 300D | 1986 300E | 1986 560SEL | 1986 560SEL/Carat | 1987 560SEC | 1991 300D 2.5 | 2006 R350
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 12:44 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page