PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   going from single belt to twin belts on euro td (http://www.peachparts.com/shopforum/diesel-discussion/261188-going-single-belt-twin-belts-euro-td.html)

europower 09-14-2009 07:19 PM

going from single belt to twin belts on euro td
 
Ok so i scored a twin belt pulley for the alternator and one for the water pump, now i look at my crank pulley and i guess i need to change that as well?
I pulled the 1st two pieces from a 617 engine on a w126 83 300sd, can i use a crank pulley from a 84 300d?
Do i need a puller to get that baby out?
Thanks

barry123400 09-14-2009 07:32 PM

I would have used the single belt system getting the required alternator pulley off a 240 D or older non turbo up till 1981 300d. Not advisable to disturb the harmonic balancer unless required to change a seal. If you do change the harmonic balancer make sure to locktite the bolts with blue lock tight. The balancers have been known to come loose. This can cost you a crankshaft.

europower 09-14-2009 07:35 PM

Ok i got it, so im going back to yard,thanks.


All times are GMT -4. The time now is 10:43 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website