|
|
|
#1
|
|||
|
|||
rear window heat
The electrical connection for my rear window heat has become dis-attached from the window. Can i solder this back on?
Thanks
__________________
1979 300D. |
#2
|
||||
|
||||
Mine had detached flat copper strips (wires?).
I was able to solder them back on and they tested OK whey I used the Ohm Meter to see if the Conducted. (Also I had the Window out of the Car when I did it as I was repairing rust under the rubber weather stripping.) However, I found out that my tiny conducting lines were so corroded all over that they would not conduct. Each little dark blotch on the copper conducting line represents a corroded area that will not conduct. see thumbnail
__________________
84 300D, 82 Volvo 244Gl Diesel |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|