|
|
|
#1
|
|||
|
|||
603 questions
I have a 92 300 SD and am trying to install a timing chain . Set cam with #1 cyl valves closed and crank at 15 btdc. How do I set the injector pump? Jerry
|
#2
|
|||
|
|||
Chain sprocket mark at the cam should line up with head mark when crank is at zero. Pump gets mounted at 15 atdc when locked. Locking tool fits into hole on side of pump, and holds a raised line which will be centered in hole when in right spot. Access hole is covered with a 17mm bolt, below #6 injection line. I guess it can be mounted without a locking tool if the line is centered when done. The AB timing device is recommended for final adjustment.
Last edited by NJ300sdl; 10-10-2009 at 07:19 PM. Reason: clearity |
Bookmarks |
|
|