Okay, so when I installed my greasecar kit I had to slice my heater hose in half (running from engine to feed pipe, part number 1238324394). However, nobody carries the one that was on my car, it is completely out of stock.

There is a replacement though for newer models (I'm guessing turbo) that is available. My question is will this work on my NA 617? Especially because it's ACCII.

The one on my car is the 3rd item down, and the replacement one is the 4th item down on this page. I'm not comparing prices, don't worry, I just want to know if the available hose will work on my NA 617.

https://www.**********.com/search/product.aspx?sid=liof3345nj2m0euwyu33mf45&makeid=800016@Mercedes&modelid=1194296@300TD%20&year=1980&cid=24@AC%20%26%20Heat%20-%20Climate%20Control&gid=6892@Heater%20Hose

Did you Email them and check the availability?

What about our sponsers? Parts tab at the top of the page.

__________________
84 300D, 82 Volvo 244Gl Diesel

Yup, they can't find it anywhere. Trust me, I tried everywhere. Nobody has it.

Not even the dealer?

__________________
http://farm8.staticflickr.com/7271/7...144c3fc1dc.jpg

Well if you need to find something else it might be helpful to have a pic of your presest installation.

If you absolutely had to have one that is the same; how about the Junk Yard?

Added:
In the pic below the part number you want is for a California model and that is out of stock.
However, they stock the hose for the Federal model. While the Federal model may be slightly different; you are going to cut it anyway.
See if some one has one for the Federal Model locally that you can actually look at to compare it to the one you have; and decide from there.

Attached Thumbnails

 

__________________
84 300D, 82 Volvo 244Gl Diesel

PM sent.

__________________
2009 ML320 Bluetec
1985 300CD
1981 300TD

Past Mercedes
1979 300TD
1982 300TD
2000 E320 4Matic Wagon
1998 E430
1984 300SD
1980 300SD

Going to try them tomorrow. Parts center was closed by the time I got out of class today =/

That would be my next option. However depending on how long it's been sitting there, it might have aged terribly (especially here). I'll try that after the dealership.

...you sure?

I didn't think you would check it this quick. I put posted here first, then typed the PM.

__________________
2009 ML320 Bluetec
1985 300CD
1981 300TD

Past Mercedes
1979 300TD
1982 300TD
2000 E320 4Matic Wagon
1998 E430
1984 300SD
1980 300SD

I added to my origional Post. There is 2 types of hose depending on the Chassie numbers and if it is a Federal Car or a Claifornia Car.
One of the hoses is not back ordered. Since you are going to cut the hose you might be able to make the wrong hose fit.
someone local may have that hose for you to look at.

__________________
84 300D, 82 Volvo 244Gl Diesel

I guess I should have been more descriptive. I removed my greasecar kit, and need a replacement hose for the one that I had to cut open. The hose I had to cut open is the heater hose, and I can't find one.

I'm just going to swing by the dealership today and see if they have one or order one.

NAPA online had one with the same part number as you gave; $13.

__________________
84 300D, 82 Volvo 244Gl Diesel

Is the hose bad, or just cut? If it is cut, you could simply put a 5/8 brass splice available at Lowe's, Home Depot, etc.

__________________
2009 ML320 Bluetec
1985 300CD
1981 300TD

Past Mercedes
1979 300TD
1982 300TD
2000 E320 4Matic Wagon
1998 E430
1984 300SD
1980 300SD