no glow, what now?
Got in Serenity this morning, turned the key, and no glow plug light.... Thinking maybe just the bulb in the cluster blew I went to start after the usual amount of time, after cranking for far too long she started. Apparently the plugs or relay aren't workin'. What should I check first?
|
Here is a link to a bunch of glow threads from the "Resources" section at the top of the page.
http://www.peachparts.com/shopforum/diesel-discussion/137732-glow-plugs-link-thread.html#post1019018 I just fixed a glow plug problem with mine. Luckily it was easy. Basically you get a meter and check the plugs, relay, fuses and wiring. On the 6 cyl. they can be a pain because of the intake. |
Quote:
|
1 Attachment(s)
If the Bulb is OK it will light up with the rest of you Instrument Cluster warning Lights when you first turn the Ignition key.
As Brian said do a visual check of the Fuse. Below is a pic of my 80amp Fuse that cracked. You may need to take a really had look at it. The first time I looked I did not notice it. |
Quote:
|
Checked the fuse, it was fine. Figured the next step was just switch out the whole relay, All fixed! something in the relay must have konked out. Anyone seen a cause of relays failing outside the relay itself? I'd hate to have some other problem I'm not seeing cook this relay too.
|
All times are GMT -4. The time now is 07:56 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website