Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-04-2009, 03:25 AM
Registered User
 
Join Date: Jan 2008
Posts: 52
96 E300 Fuel Leak

Hi everyone, Two of the clear plastic fuel going to the IP has a leak. I'm planning to replace it all, the car is a 96 E300. What brand is a good kind and where can I buy it? Is it easy to pull out these hoses, and do I have to pull out the intake minifold or just the windshield washer tank? Thanks in advance!

Reply With Quote
  #2  
Old 11-04-2009, 12:50 PM
Registered User
 
Join Date: Feb 2004
Location: Walnut Creek, CA & 1,150 miles S of Key West
Posts: 4,874
The preformmed plastic fuel lines and attachement clips come from the dealer.

The white horseshoe clips are spreaders used to release the fuel line for removal. Push them in tightly (eg: make a ringer), then remove. When new lines are installed the clips should be loose and floppy.

As far as what has to be removed it will depend entirely on you. I can move the windsheild washer bottle and get all of them on and off in 10 minutes or so. Others find it easier to remove the IM.
__________________
Terry Allison
N. Calif. & Boca Chica, Panama

09' E320 Bluetec 77k (USA)
09' Hyundai Santa Fe Diesel 48k (S.A.)
Reply With Quote
  #3  
Old 11-05-2009, 03:44 AM
Registered User
 
Join Date: Jan 2008
Posts: 52
96 E300 Fuel Leak

THANKS AGAIN!
Reply With Quote
  #4  
Old 11-05-2009, 11:44 AM
tankowner's Avatar
You talkin’ to me?
 
Join Date: Dec 2007
Location: Columbia, MO
Posts: 907
I have been messing around with these lines on my '95 recently, so I'll chime in. I removed the intake manifold to get to the lines, but I had to because I broke off the platic connector end of one of them in the prefilter housing - so I needed a better angle to get that piece out. I have a replacment coming in today, although, I did manage to JB weld the broken connector back together for the time being so that I can get around until the new one arrives. I have a mystery leak, that I thought might be coming from these lines. I replaced the o-rings and reinstalled but the leak persists. One thing I did find was that with the new o-rings on, it was pretty hard to get the connectors to snap back in . Maybe I don't have the right size o-rings. What I did was to take a wooden dowel rod, which I placed on top of the connector and then tapped it down with a rubber mallet. Maybe a little risky, but it worked for me to get them seated properly. Also, watch out - I broke two brittle vacuum lines while I was in there that I had to fix when I was done.

__________________
'95 E300D ("Tank") - 231,000 miles
'79 240D ("Biscuit") - 197,250 miles (Sold)
'83 240D ("Ding-Ding") - 217,000 miles (Death by deer)
______________________________________

"Back off, man. I’m a scientist” ~ Peter Venkman
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 07:31 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page