|
|
|
#1
|
||||
|
||||
300TD brake Servo Hose
I need a new fitting on my brake Servo hose, http://www.allpartsexpress.com/item.wws?sku=MBZ013516&itempk=59463&mfr=Genuine&weight=0.47 my question is, do I need to replace it or Can it be left as is with the port blocked off, it's a vac line that goes to an unknown place, Does anyone know where this line goes? my thought was the transmission but I dont know...
__________________
hum..... 1987 300TD 311,000M Stolen. Presumed destroyed |
#2
|
||||
|
||||
You are better off just replacing that vacuum line with a new or good used one.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#3
|
||||
|
||||
Well, I plan on replacing the hose if I need to, I was wondering what the Vac hose goes to that broke off of it
__________________
hum..... 1987 300TD 311,000M Stolen. Presumed destroyed |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|