PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Diesel Discussion (http://www.peachparts.com/shopforum/diesel-discussion/)
-   -   Alda caps for 300SDL, I have 3 to sell (http://www.peachparts.com/shopforum/diesel-discussion/265883-alda-caps-300sdl-i-have-3-sell.html)

werminghausen 11-20-2009 06:06 PM
Alda caps for 300SDL, I have 3 to sell
 
1 Attachment(s)
I have 3 nicely machined caps to fill the 'hole' when you are intending to remove the Alda on your 300SDL. I don't know if it will fit any other IP too.
If someone is interested I'll sell them for $15 including shipping in the US. Please drop me a note at werminghausen@gmail.com. Martin

dagObx 11-20-2009 08:57 PM
I assume this is for a 603.xxx engine?

Ian White 11-20-2009 10:41 PM
Quote:
Originally Posted by werminghausen (Post 2344134)
I have 3 nicely machined caps to fill the 'hole' when you are intending to remove the Alda on your 300SDL. I don't know if it will fit any other IP too.
If someone is interested I'll sell them for $15 including shipping in the US. Please drop me a note at werminghausen@gmail.com. Martin
Those look nice. You must have a small toolroom lathe at home no?

Brian Carlton 11-20-2009 11:07 PM
PM sent for (2)

300SD81 12-25-2009 01:57 PM
Just installed mine, confirmed that it does fit on the 617. :)

Hit Man X 12-25-2009 06:14 PM
Quote:
Originally Posted by 300SD81 (Post 2368028)
Just installed mine, confirmed that it does fit on the 617. :)


Good to know, I will purchase another now. :D

Brian Carlton 12-25-2009 06:16 PM
Quote:
Originally Posted by Hit Man X (Post 2368112)
Good to know, I will purchase another now. :D
I'd use a bit of Loctite on the threads.

I do believe that I've made a $15.00 mistake by not doing same..........:o

Hit Man X 12-25-2009 06:18 PM
Quote:
Originally Posted by Brian Carlton (Post 2368113)
I'd use a bit of Loctite on the threads.

I do believe that I've made a $15.00 mistake by not doing same..........:o


Blue?

Have you removed the ALDA from your 617? I have had mine off for years now.

Eric 12-26-2009 09:00 AM
pm sent

Brian Carlton 12-26-2009 09:33 AM
Quote:
Originally Posted by Hit Man X (Post 2368117)
Blue?

Have you removed the ALDA from your 617? I have had mine off for years now.
I'm sure that will be fine.

The 617 still has the ALDA. It's got so much low end pull that I don't see any need to remove it. Below 40 mph, it pulls harder than the 603 at a given pedal position. Above 40, the 603 walks away from it.

Hit Man X 12-26-2009 08:34 PM
Quote:
Originally Posted by Brian Carlton (Post 2368385)
I'm sure that will be fine.

The 617 still has the ALDA. It's got so much low end pull that I don't see any need to remove it. Below 40 mph, it pulls harder than the 603 at a given pedal position. Above 40, the 603 walks away from it.


Have you adjusted the unit on you 617? I had mine maxed out then just opted to pull it off before I installed new injectors. The injectors drastically increased performance and if my odometer worked, I am sure fuel economy has increased too.


All times are GMT -4. The time now is 10:06 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website