|
|
|
#1
|
|||
|
|||
1985 300SD Driver Door Unlocking/Locking
My 300SD will allow me to unlock the driver's side door from the outside, but the other doors do not automatically unlock as they should. However, if I unlock with the key at the trunk, all car doors unlock properly (so the vacuum system and actuators are working at all doors). So what should I be looking for to fix this? I speculate there is a switch in the driver's side lock that is not activating the unlock "signal" for the other doors.
|
#2
|
||||
|
||||
Sounds like a broken wire at the hinge on the drivers door. This is more common than you would think but it's easy to splice in a new section.
__________________
1983 300SD 200000miles |
#3
|
|||
|
|||
good answer to me...
I may as well agree.....This is my problem, as well.........I need to get around to the fix.
I am also posting for the first time in over a year......Previously, all of my posts were DELETED, because I had not posted for six months......I went and found out that I was "gone".......They let me "back", however all of my previous posts had been nuked. Sorry for the rambling. Best wishes always, spo123 |
Bookmarks |
|
|