|
Name this part.
On a 1984 300D, between the glowplugs for cylinders 3 and 4, what's the little electrical connection that plugs into something that goes in the block?
|
Thats the temperature sensor for the gauge on the dash.
|
Damn it, is there an easy way to replace it? The wire is broken off the connector.
|
does your temp gauge work?
Just take the little black barrel thing part and try to reconnect the wire to the terminal. |
we have just cleaned up an old term like that and soldered it right in place if gage worked - jz
|
I recently replaced mine, it just unscrews; you will lose about a quart of coolant.
|
Quote:
|
cant you put a new end on the wire?
|
Would this apply to an 84 300SD as well? Pretty similar motors - both 617 I think.
If so, what's the sensor at the thermostat housing for? |
ACC
Climate control. The other one in the head is for the glow plug relay.
Jay. |
Good deal - thanks for the help!
|
| All times are GMT -4. The time now is 03:42 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website