|
|
|
#1
|
|||
|
|||
glow pluging with a battery and wires?
my OM616 if out of my /8 awaiting install in my 88 190E and I am curious, how do you glowplug the motor with just wires and a battery?
once thats good, how do I start it with just wires and a battery? just push stop on the injection pump when I want it off, right? thanks much!
__________________
1992 850i 6 speed 1991 M3 S54B32 swap 2007 328iT/6 RWD sport wagon 1987 325E 330iZHP engine swap 2004 Vespa 200GT 1976 W115 240D getting a much bigger engine. 5.5L 1997 R129 SL600 5AT |
#2
|
|||
|
|||
Ground block to battery. 12 volts to end plug on loop style, 12 volts to all if pencil plugs. 12 volts to starter, jump solenoid to 12 volts. Make sure engine is strapped down.
__________________
1977 300d 70k--sold 08 1985 300TD 185k+ 1984 307d 126k--sold 8/03 1985 409d 65k--sold 06 1984 300SD 315k--daughter's car 1979 300SD 122k--sold 2/11 1999 Fuso FG Expedition Camper 1993 GMC Sierra 6.5 TD 4x4 1982 Bluebird Wanderlodge CAT 3208--Sold 2/13 |
#3
|
||||
|
||||
Try not to run it too long
Without coolant.
(Also consider you have no engine Temp Gauge.)
__________________
'84 300SD sold 124.128 |
#4
|
|||
|
|||
they are loop plugs, is the wire the braided bit coming off the end?
I won't be running it long until I get the mounts, prop shaft, cooling system and glow relay installed.
__________________
1992 850i 6 speed 1991 M3 S54B32 swap 2007 328iT/6 RWD sport wagon 1987 325E 330iZHP engine swap 2004 Vespa 200GT 1976 W115 240D getting a much bigger engine. 5.5L 1997 R129 SL600 5AT |
Bookmarks |
|
|