my OM616 if out of my /8 awaiting install in my 88 190E and I am curious, how do you glowplug the motor with just wires and a battery?

once thats good, how do I start it with just wires and a battery?

just push stop on the injection pump when I want it off, right?

thanks much!

__________________
1992 850i 6 speed
1991 M3 S54B32 swap
2007 328iT/6 RWD sport wagon
1987 325E 330iZHP engine swap
2004 Vespa 200GT
1976 W115 240D getting a much bigger engine. 5.5L
1997 R129 SL600 5AT

Ground block to battery. 12 volts to end plug on loop style, 12 volts to all if pencil plugs. 12 volts to starter, jump solenoid to 12 volts. Make sure engine is strapped down.

__________________
1977 300d 70k--sold 08
1985 300TD 185k+
1984 307d 126k--sold 8/03
1985 409d 65k--sold 06
1984 300SD 315k--daughter's car
1979 300SD 122k--sold 2/11
1999 Fuso FG Expedition Camper
1993 GMC Sierra 6.5 TD 4x4
1982 Bluebird Wanderlodge CAT 3208--Sold 2/13

Without coolant.
(Also consider you have no engine Temp Gauge.)

__________________
'84 300SD sold
124.128

they are loop plugs, is the wire the braided bit coming off the end?

I won't be running it long until I get the mounts, prop shaft, cooling system and glow relay installed.

__________________
1992 850i 6 speed
1991 M3 S54B32 swap
2007 328iT/6 RWD sport wagon
1987 325E 330iZHP engine swap
2004 Vespa 200GT
1976 W115 240D getting a much bigger engine. 5.5L
1997 R129 SL600 5AT